Search
Filters
Close

DPR AD1111-S0

SKU: DPR AD1111-S0
DPR AD1111-S0 Label Rewinder with Adjustable Core Holder.

The AD1111-S0 label rewinder can handle labels up to 5” wide and rewind rolls with diameter up to 10” onto an adjustable core holder from 1.57” up to 4.64”. 


The AD1111-S0 label rewinder is equipped with an external auto-switching 100/240VAC - 2.5A at 24V power supply and an electronic circuit controls the functions.


When the roll of labels runs out, the rewinder stops and sounds an acoustic signal.


The rotation, which is adjustable to clockwise or counterclockwise, allows to the AD1111-S0 to rewind labels face in or face out.


A tension arm adjusts the speed of rotation. When it is down, the rewinder turns at full speed, whereas when the tension arm is up, the rewinder is idle and blocks the motor’s rotation when the printer stops.

The AD1111-S0 label rewinder can handle labels up to 5” wide and rewind rolls with diameter up to 10” onto an adjustable core holder from 1.57” up to 4.64”. 


The AD1111-S0 label rewinder is equipped with an external auto-switching 100/240VAC - 2.5A at 24V power supply and an electronic circuit controls the functions.


When the roll of labels runs out, the rewinder stops and sounds an acoustic signal.


The rotation, which is adjustable to clockwise or counterclockwise, allows to the AD1111-S0 to rewind labels face in or face out.


A tension arm adjusts the speed of rotation. When it is down, the rewinder turns at full speed, whereas when the tension arm is up, the rewinder is idle and blocks the motor’s rotation when the printer stops.