Easy to use is the major importance of the OPT series. The CCD scanner reads the barcode after manually triggering the scanner by the triggerswitch. The choice for OPT 6125 gives the possibility to read labels up to 65mm.

Features   Benefits       CCD engine   Touch reading with 200 scans/sec           Different interfaces available   Easy connectivity RS232, Keyboard Wedge, USB           Lower power consumption   Ideal to use as input device for computer hardware           Configurable by bar code configuration manual   A variety of parameters can be set           Can read both marginal quality and high density labels   Allows this scanner to have many applications

Electrical specifications

Voltage requirement: 5 V ± 5%

Current consumption: max. 100 mA

Idle current: 30 mA

Optical specifications

Light source: 630 nm red LED

Photo sensor: 2k element CCD

Scan rate: 200 scans/sec

Reading width: 65 mm

Min. resolution at PCS 0.9: 0.127 mm / 5 mil

Min. PCS value: 0.45

Depth of field: 0 - 30 mm / 0 - 1.18 in (res. 0.33 mm / 13 mil), at PCS 0.9 EAN13

Communication specifications

Available interfaces: Keyboard Wedge: XT/AT and PS2, RS232, USB

Identification

Supported barcode symbologies (1D): JAN/UPC/EAN (WPC) incl. add on, Chinese Post, Code 39, Code 93, Code 128, IATA, ISBN-ISSN, Industrial 2of5, Interleaved 2of5, Matrix 2of5, MSI/Plessey-UK/Plessey, Telepen, Tri-Opticc, S-Code

Functionality

Trigger mode: manual

Configuration: over 300 parameters can be set by RS 232 menu book or setup program

Environmental specifications

Temperature in operation: 0 to 40 ºC / 32 to 104 ºF

Temperature in storage: -20 to 60 ºC / -4 to 140 ºF

Humidity in operation: 20 - 80 % (non-condensing)

Humidity in storage: 20 - 90 % (non-condensing)

Ambient fluorescent light immunity: 3,000 lx max

Ambient white light immunity: 2,000 lx max

Shock drop test: 1.5 m / 5 ft drop onto concrete surface

Shock vibration test: 12 - 100 Hz with 2G for 1 hour

Physical specifications

Dimensions: 152 x 72 x 22 mm / 5.98 x 2.83 x 0.87 in

Case material: ABS

Weight body: Ca. 90 g / 3.2 oz

Weight cable: Ca. 110 g / 3.9 oz, wedge adapter cable: Ca. 25 g / 0.9 oz

Cable: 1.000.000 bendings at 90° with 500 g / 1 lb 2 oz

Cable length: RS232 and USB : 2000 mm / wedge : 2400 mm / wedge adapter cable 240 mm

Connector Keyboard Wedge: DIN 5 female and MiniDIN6 male, adapter DIN 5 male and MiniDIN6 female

Connector RS232: DB9 F with external power

Connector USB: USB-A

Regulatory

Product compliance: EN 55022, EN 55024